|
Specifications:
|
- Breathable
- Rot proof
- Frost proof
- Foldable
- Paintable
- Anti-static
- Very lightweight
- Usable inside concrete
- Very easy handling even for the novice
- Length per standard packaging unit: 0,7m, 7m or 36m (1m², 10m², 50m²). Also available as cut good.
- Lane width: 1,4m
- Thickness: 0,5mm
- Colour: Copper
- Weight: approx. 30g/m2
- Material: High-performance copper/polyester compound
- Screening efficiency static fields: 99,999.999% to 99,999.999.99% (only WITH grounding!)
- Screening efficiency low-frequency, electric fields: 99,999.999% to 99,999.999.99% (only WITH grounding!)
- Screening efficiency high-frequency fields: 70dB (99,999.99%) at 20GHz to over 110dB (99,999.999.999%) at 500MHz (even WITHOUT grounding!)
|
|
Damping chart:
|
Standard-conformant tests according to MIL-STD-285 approve the extreme screening performance of Aaronia
X-Dream®: The damping performance for pulsed high-frequency radiation in the frequency range between 1 and 2GHz, for instance caused by cell towers, is up to 100dB (99,999.999.99%). Compared
to the also shown screening fleeces from other manufacturers, Aaronia X-Dream® offers a one hundred
times (or more) better screening efficiency in the tested frequency range. Furthermore, allowing grounding, it is equally efficient against static
and low-frequency electric fields such as caused by almost any cables running through homes, various home appliances, high-voltage lines, etc.
Even in the extremely high GHz-range at far more than 20GHz!, Aaronia X-Dream® still offers an
extremely good screening efficiency of approx. 70dB.
|
|
Material characteristics:
|
Electron microscope imaging shows the excellent material purity of Aaronia X-Dream®
High-resolution imaging shows the chaotic structure of Aaronia X-Dream® fleece, which provides exceptional screening performance.
Electron microscope imaging shows the inseperable interconnections between the fibres, thus forming a structure impermeable to RF radiation
|
The various screening systems available on the market today differ widely in both affordability
and protection efficiency.
They are often far too difficult to handle, particularly for the novice, but also for professional users.
Apart from this, they are mostly far too expensive.
Also, customers currently mostly need TWO seperate screenings simultaneously, as
most screenings against RF offer hardly any protection against LF fields, and vice-versa.
With their EMC high-tech fleece Aaronia X-Dream®, Aaronia probably offers the world's most
efficient screening performance of over 110dB, unique in this price category and with these
material characteristics.
Still, Aaronia X-Dream® is easy to handle even for the novice.
Aaronia X-Dream® screening fleece offers simultaneous protection against high-frequency
(RF) AND low-frequency (LF) E-field radiation. The secret behind this extremely good
efficiency is a patented tissue based on a compound of copper and polyester.
Aaronia X-Dream® is easy to handle and to install. It can be folded without taking
damage, is sturdy, frost proof, rot proof, breathable and can even be installed in concrete.
As such, it is also applicable for outdoor use and can thus save a lot of cost.
Aaronia X-Dream® can be used both for screening electric fields from local LF radiation
sources like cables or distribution boxes, as well as for screening rooms or entire
houses or other buildings against RF radiation. Installation is performed by laying
the fleece in adjacent lanes which need to overlap approx. 15cm for guaranteeing a closed
surface. It is noteworthy that it is NOT necessary to ground Aaronia X-Dream® for RF
screening!
Still, we generally recommend grounding using our grounding package, as this will also
add protection against low-frequency electric fields from high-voltage lines,
power cables etc.
|
|
Screening a room:
|
|
To protect a room (such as a bedroom) against high frequency radiation, the entire room
needs to be covered with Aaronia X-Dream® completely.
On the other hand, if screening against low-frequency electric fields (such as the electrical
distribution box or in-wall cables) is desired, only a small area around the radiation source
needs to be covered. Attention: For achieving low frequency screening, the fleece must
be grounded! For this, we strongly recommend our Aaronia grounding package. For floors,
the fleece can be installed invisibly under the carpet, or, in a new building, in the
floor pavement. When attaching to walls, the fleece can be attached like usual wallpapers
using a special glue. If walls are made from plasterboard, wood or similar, the fleece
can simply be "stapled" to the wall.
Though, the easiest alternative is the self-adhesive "PLUS" version of Aaronia X-Dream®. The
surface needs to be dust-free, free of grease and dry.
Attachment to ceilings can be performed similarly. Doors and their frames should be
covered entirely and completely with the fleece, preferably using the self-adhesive
Aaronia X-Dream PLUS®, yielding to an almost perfect connectivity between the
door's fleece and the fleece used in the rest of the room.
For window use, we recommend Aaronia-Shield® which allows elegant installation as
an invisible "fly screen". After installation, the EMC fleece can also be painted and
covered with wallpaper or plaster. It even offers an attractive surface with the
original copper appearance.
Our installation manual makes it easy even for the novice to construct a screened
room without hassle.
|
|
Abschirmung eines Hauses oder Gebäudes:
|
|
Houses and other buildings should be protected with Aaronia X-Dream indoors.
This is achieved by glueing or "stapling" the EMC fleece to the walls.
In roofs, the fleece should be installed directly beneith the vapor barrier.
In floors, the fleece can even be installed in the floor pavement.
Always note that for professional RF screening, a hermetically sealed enclosure,
a so-called Faraday cage, must be built.
Be careful to always leave a bit of overlap when attaching the fleece to
walls, floors and ceilings to be able to later connect the lanes without gaps!
Windows need to be screened as well.
For this, we recommend our highly-transparent screening fabric Aaronia-Shield®.
|
|
Damping specifications for Aaronia high-performance shielding products
|
|
Product:
|
Frequency:
|
Damping in dB:
|
Damping factor:
|
Damping in %:
|
Application examples:
|
|
A2000+
|
1GHz
10GHz
|
20dB
10dB
|
100
10
|
99,0%
90%
|
Indoor and outdoor shielding
Low exposure
|
|
Aaronia-Shield®
|
1GHz
10GHz
|
50dB
45dB
|
100.000
30.000
|
99,999%
99,992%
|
Textile applications (Canopies, clothing, curtains etc.)
Low and high exposure
|
|
Aaronia X-Dream®
|
1GHz
10GHz
|
100dB
80dB
|
10.000.000.000
100.000.000
|
99,999.999.99%
99,999.999%
|
Indoor shielding, measurement chambers
High to highest exposure
|
Notice: when using the dB unit, an increase of 10dB is equivalent to a 10fold increase
in strength. For example, 100dB is 10 times as strong as 90dB, or 100 times as strong
as 80dB, etc.
© Aaronia AG, DE-54597 Euscheid, www.elektrosmog.de, Tel. ++49(0)6556-93033
|
