Near field probe set - RF sniffer DC to 6GHz
near field probes
PBS2 Probe Set with 40dB Preampifier		 Order Probes

Specifications:

  • PBS1 Sniffer Set:
  • Frequency range: DC-6GHz
  • Incl. 5 probes (details listed below):
    • Directional E-field probe
    • 50mm magnetic field sniffer
    • 25mm magnetic field probe
    • 12mm magnetic field probe
    • 6mm magnetic field probe
  • Dimensions of case (L/W/D): (300x190x70) mm
  • Weight PBS1 (case incl. probes): 1200gr
  • Warranty: 10 years

  • PBS2 Sniffer Set:
  • Frequency range: DC-6GHz
  • Incl. High-End 40dB Preamplifier with power supply
  • Incl. 5 probes (details listed below):
    • Directional E-field probe
    • 50mm magnetic field sniffer
    • 25mm magnetic field probe
    • 12mm magnetic field probe
    • 6mm magnetic field probe
  • Dimensions of case (L/W/D): (300x190x70) mm
  • Weight PBS2 (case incl. probes and pre-amplifier): 1500gr
  • Warranty: 10 years

Included Probes:
  • Directional E-field probe:
  • Sensor diameter: 3mm
  • Maximum resonance frequency: >3GHz
  • Connector: 50 Ohms SMB socket (m)
  • Warranty: 10 years

  • e field probe
    Enlarge image
     Specifications may change without prior notice
  • 50mm magnetic field sniffer:
  • Sensor diameter: 50mm
  • Maximum resonance frequency: 700MHz
  • Connector: 50 Ohms SMB socket (m)
  • Warranty: 10 years

  • 50mm H-field probe
    Enlarge image
     Specifications may change without prior notice
  • 25mm magnetic field probe:
  • Sensor diameter: 25mm
  • Maximum resonance frequency: 500MHz
  • Connector: 50 Ohms SMB socket (m)
  • Warranty: 10 years

  • 60mm H-field probe
    Enlarge image
     Specifications may change without prior notice

  • 12mm magnetic field probe:
  • Sensor diameter: 12mm
  • Maximum resonance frequency: 2,6GHz
  • Connector: 50 Ohms SMB socket (m)
  • Warranty: 10 years

  • loop probe
    Enlarge image
     Specifications may change without prior notice

  • 6mm magnetic field probe:
  • Sensor diameter: 6mm
  • Maximum resonance frequency: >6GHz
  • Connector: 50 Ohms SMB socket (m)
  • Warranty: 10 years

  • 6mm loop probe
    Enlarge image
     Specifications may change without prior notice

Included in delivery:
  • 1 x 50mm magnetic field probe
  • 1 x 25mm magnetic field probe
  • 1 x 12mm magnetic field probe
  • 1 x 6mm magnetic field probe
  • 1 x directional E-field probe
  • Pre-amplifier with power supply (only PBS2)
  • Transport case with paddings
  • 1m SMB-to-SMA cable
  • Miniature tripod

Details:

Magnetic field measurement on a group of components
Magnetic field measurement on a group of components using the
25mm H-field probe.
 Our EMC probe set allows for straightforward pinpointing and measurement of interference sources in electronic component groups as well as execution and monitoring of generic EMC measurement. Our probe set is especially suitable for:

- Pinpointing interference sources
- Estimation of interference field strength
- Verification of shielding and filtering measures
- Identifying faulty components
- Detecting circuitry overly sensitive to interference

Our set includes a total of 5 probes: 4 probes for magnetic field measurement and one for measurement of electric fields. All probes are covered with an insulating layer, thus allowing safe measurement of oscillators or mains lines.

The PBS2 probe set additionally contains a high-performance pre-amplifier, allowing measurement of significantly weaker interference sources, boosting the sensitivity of our instruments by up to 40dB.
All probes have deliberately been implemented as passive devices to make them usable as transmitting devices as well. Consequently, components and circuits sensitive to interference can easily be pinpointed.
Pinpointing interference sources
Measurements using the included minature tripod.
 Perfect for locating interference sources which might have been found e.g. in an EN55011, EN55022 or EN50371 (Class A or Class B) survey. After implementing appropriate changes in the circuit, their efficiency can easily and reliably be verified. That way, expensive and time-consuming re-assessments in an EMC laboratory can be skipped.
EMC problems ?
This EN 55022 B survey discloses a multitude of problematic sources of interference.
With the help of our PBS1 & PBS2 probe sets, these emitters can easily
be pinpointed and eliminated.
 Verification of official EMC limits: For example, should an interference source exceed an official EMC limit by 10dB, our probe set can easily verify if a certain countermeasure succeeds in making the circuitry conforming again.
This is another situation where the probe sets can eliminate the need for expensive and time-consuming measurements in EMC laboratories.

Frequency ranges of Aaronia precision antennas and probes:

Frequency ranges overview for antennas & probes
© Aaronia AG, DE-54597 Euscheid, www.spectran.com, Phone ++49(0)6556-93033

Aaronia AG, www.spectran.com Aaronia AG, Gewerbegebiet Aaronia AG, DE-54597 Euscheid, Germany
Phone ++49(0)6556-93033, Fax ++49(0)6556-93034
Email:mail@aaronia.de URL:www.spectran.com
Registered trademark of Aaronia AG
are registered trademarks of Aaronia AG
Back to the Aaronia HOMEPAGE