Precompliance test antenna series HyperLOG® 60xxx span 680MHz to 18GHz

• DLR (Deutsches Zentrum für Luft und Raumfahrt), Köln, Germany
  
• BMW, München, Germany
  
• Hewlett Packard, Dornach, Germany
  
• Robert Bosch GmbH, Plochingen, Germany
  
• Bundesamt für Sicherheit in der Informationstechnik, Bonn, Germany
  
• IBM, Stuttgart, Germany
  
• University of Florida, USA
  
• Audi AG, Ingolstadt, Germany
  

• DKD ISO calibration certificates available from Aaronia:
  Calibration is performed by comparison with reference standards or reference measurement devices which have been calibrated with the national German calibration service (DKD) and hence are calibrated according to the national reference standards which are used by the federal physical-technical administration (PTB) for maintaining accordance with the international units system (SI).
  
• This calibration is performed in accordance with DIN EN ISO/IEC 17025 and ISO 9001 standards.
  
• The log-periodic antennas of the HyperLOG® 60xx series are suitable for interference field strength measurement. The specialized broadband characteristics allow measurements to be taken in the complete specified frequency range without switching.
  
• These antennas are suitable for measurement according to the following standards and procedures:
  CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461.
  

• Only a single broadband antenna for the complete frequency range from 680MHz to 18GHz
  
• Optimal for usage with spectrum analysers for EMC or EMI precompliance measurement
  
• Complete ISO calibration certificate (optional)
  
• Top-quality high-tech TEFLON antenna support
  
• Incl. high-tech radom with modern, appealing design
  
• Freely alignable polarisation
  
• Calibration data can be saved to an IC on the antenna and also be read back
  
• Excellent forward/backward ratio
  
• Excellent symmetry of radiation patterns
  
• Integrated 1/4" tripod socket
  
• Suitable for mobile use
  
• Suitable for outdoor installation
  
• Directional
  
• Robust design
  
• Splash water proof
  
• Small weight and dimensions
  
• Made in Germany
  
• 10 years warranty
  

• HyperLOG 6080:
  
• Design: Logarithmic-periodic
  
• Frequency range: 680MHz-8GHz
  
• Max. transmission power: 100W CW (400 MHz)
  
• Nominal impedance: 50 Ohms
  
• VSWR (typ.): <1:2,5
  
• Gain (typ.): 5dBi
  
• Antenna factor: 22-44dB/m
  
• Return loss: Better than -10dB
  
• Calibration points: 733 (10MHz steps)
  
• RF connection: SMA socket (18GHz) or N socket using an adapter
  
• Polarisation: linear vertical/horizontal
  
• Tripod connection: 1/4"
  
• Dimensions (L/W/D): (340x200x25) mm
  
• Weight: 250gr
  
• Warranty: 10 years
  

  
  
  

  
  

  Specifications subject to change without notice
  

• HyperLOG 60100:
  
• Design: Logarithmic-periodic
  
• Frequency range: 680MHz-10GHz
  
• Max. transmission power: 100W CW (400 MHz)
  
• Nominal impedance: 50 Ohms
  
• VSWR (typ.): <1:2,5
  
• Gain (typ.): 5dBi
  
• Antenna factor: 22-46dB/m
  
• Return loss: Better than -10dB
  
• Calibration points: 933 (10MHz steps)
  
• RF connection: SMA socket (18GHz) or N socket using an adapter
  
• Polarisation: linear vertical/horizontal
  
• Tripod connection: 1/4"
  
• Dimensions (L/W/D): (340x200x25) mm
  
• Weight: 250gr
  
• Warranty: 10 years
  

  
  

  
  

• HyperLOG 60xx antenna
  
• Typical calibration data with up to 1734 calibration points (10MHz steps!)
  
• Aluminum design carrycase with custom padding
  
• Sturdy, detachable handle with "miniature tripod" mode
  
• Special Aaronia SMA toolset with over-torque protection
  

Also available in a "transparent" finish at an extra charge (polished by hand!)

Simply amazing: The multi-function handle can be turned into a rotatable, practical miniature tripod with very good stability quickly and easily

The Dream team for EMC measurement in the laboratory or in harsh outdoor environments: spectrum analyser and HyperLOG® directional antenna.

EMC antennas from Aaronia AG are totally different to the regular antennas available on the market:
Many commercially available antennas are based on PCBs and other unprofessional designs and do not really represent professional measurement technology. In addition to the simple technical construction, one more important omission is very common: these antennas come "naked", without Radom frame, as a raw PCB (particularly included with cheap broadband measurement devices). Due to this construction, mismeasurements and invisible damage caused by environmental influence (oxidation, fissures, etc.) can occur.

In contrast, HyperLOG® antennas come STANDARD with a specially constructed, high tech Radom housing. This housing has been constructed after intense research with the most modern computer technology in such a way that its shape, material and special coating have virtually no influence on measurements, not even in case of dew or other kinds of humidity collecting on the surface. Another important factor for Aaronia was the development of a Radom with the lowest possible damping factor achievable. This turned out to be quite an adventure for our development team, particularly in the high GHz ranges. Fortunately, this adventure has been mastered resulting in a beautiful, elegant design, to the complete satisfaction of the development team. Our first test measurements even by far surpassed our guidelines!
The resulting antenna had the best possible protection against mechanical stress and environmental influence without sacrificing any of its performance.
A further distinctive feature of the HyperLOG®'s Radom is the integrated 1/4" screw thread for accepting the included (directional measurent) handle. As it conforms to the standard due to its size of 1/4", the antenna could also be mounted to any other suitable tripod. Hence, polarisation and bearing of the antenna can be adjusted optimally and reliably.

Inside the Radom, you can find our sophisticated antenna itself, covered with a highly conductive GOLD COATING. This high-grade coating and the antenna's special design warrant excellent linearity over the entire frequency range, and an exceptional receiving or transmitting performance.
Each antenna is calibrated precisely in the Aaronia laboratories before dispatch. It is even possible to permanently store calibration data in a special IC on the antenna. These can later be recalled for dynamic antenna adjustment, for example, with an Aaronia spectrum analyser.

From now on, antennas from our 6000 series are also available with COMPLETE ISO CALIBRATION CERTIFICATE on request at an extra charge!