World's first REALTIME low-cost EMF spectrum analyzer / RF up to 7GHz

SPECTRAN® 10xx spectrum analysers
REAL spectrum analyzer at multi-meter price!

CONFORMING TO STANDARDS
Real ANALYSIS:
Measurement of electric and magnetic fields in this price range has never been this PROFESSIONAL.
Find radiation sources in your surroundings. Find their respective frequencies and signal strengths, including direct display of exposure limits. This used to be impossible in this price category, professional units often costing several thousand euros and being excessively complicated in handling.
The highly complex calculations in spectrum analysis incl. exposure limit calculation is being performed, unnoticed in the background, by a high-performance DSP (digital signal processor). This ultra-fast processor even allows the NF-5030, if you use the right settings, a REAL-TIME display (could you ask for more?). Simply amazing!
Fast, handy, cost-effective, beautiful exterior and PRECISION - what more could you ask ?

EXPOSURE LIMITS
At the push of a button:
Exposure limit calculation used to be a complex and awkward procedure even for the professional, as most of the time, a chaotic mixture of an abundance of different frequencies, modulations and signal strengths is present.
The indispensible, highly complex calculation of frequency-dependant exposure limits can ONLY be performed CONFORMING TO STANDARDS by a spectrum analyser with high-performance software. Not a problem for SPECTRAN® units: They can calculate even several authoritative exposure limits, precautionary limits and recommendations at lightning speed (simply selectable via a button) and display these overruns as a practical bargraph display (including convergence display in percent!), while the measurement is running.
The attached SPECTRAN® screenshot demonstrates how it works: At the push of a button, the ICNIRP exposure limit has been chosen among the various available exposure limits. SPECTRAN® now automatically calculates convergence or excess of this limit. For achieving this, often thousands of complex calculations have to be performed per second, and a steady scan of the entire frequency range needs to be performed. A true nightmare for every processor. In our test case, the graphic display shows an approximation towards the ICNIRP limit by 6,06%. If you use a NF-5030 you can even cover the total ICNIRP-banwidth (depending on frequency). Hence, even the novice can perform exposure limit calculations ACCORDING TO STANDARDS without having to use complex tables and calculators.
It really can't get any simpler.

Graphic display of frequency-dependant exposure limits. They disclose the INDISPENSIBLE consideration of signal frequency
SPECTRAN® displays exposure limits both as percentage as well as a bargraph display. Our example shows approximation to the ICNIRP exposure limits by 6,06%. (Screenshot)
NOTE:
The very common BROADBAND MEASUREMENT DEVICES (especially common among novice users) do not give you too valuable information at all. Due to the MISSING frequency reference with broadband units, DRAMATIC misinterpretations can arise: when exposure limits are calculated, these can be wrong by MORE than a factor of 1000!! (this is NOT an error, we do really mean ONE THOUSAND).
The new standard: 3D MEASUREMENT
3D magnetic field measurement:
Mismeasurement caused by wrongly adjusting the measurement device in space or troublesome and complex 3D calculations with a calculator are a problem of the past from now on, thanks to SPECTRAN® EMF (LF) measurement devices. All SPECTRAN® EMF measurement devices can measure magnetic fields directly in 3D! Starting with the SPECTRAN® NF-1010E, field strengths of the individual X, Y and Z axes can even be shown seperately. This has become possible thanks to the newest development from the Aaronia laboratories: Our high-tech REAL 3D miniature sensor coil. Consisting of a specially crafted nylon base with 3 independant windings made of ultra-thin, 0,05 mm! wire, it impresses with its extremely high sensitivity. It allows measurement of magnetic fields in all 3 spacial dimensions. The signal processor (DSP) of the SPECTRAN® performs the resulting highly complex calculations. You receive 3D measurement results which can otherwise only be achieved by using highly professional equipment.

Aaronia REAL-3D magnetic field sensor
NOTE:
Units commonly found on the market which are particularly in use by novices for "EMF measurement" can, for the most part, ONLY measure magnetic fields in ONE dimension. Hence, by misaligning the measurement device in space, SERIOUS mismeasurement can occur: in extreme cases, no magnetic field might be shown at all even though an extremely high exposure is present. Tedious and complex 3D measurements are often not performed at all, or wrongly (especially by the novice). In contrast, SPECTRAN® can performs magnetic field measurements in 3D and thus offers PROFESSIONAL measurement right from the start!
HUGE digital LC display
Pure luxury:
The huge, high resoution digital LC display more than 80x60 mm in size! It has been developed especially for SPECTRAN® by Aaronia. Needless to say, is uses FSTN quality for crystal clear display. It covers a vast amount of display capabilities (listed from top to bottom):
Big graphics display (pixel display) with 51x25 pixels (can be used for complex spectrum and exposure limit display, convenient menu navigation, etc.)

HUGE numeric display (4 digits, max. 9999)

Large, high-resolution bargraph (50 segments) for very responsive trend display

Various function and mode indication display blocks (AUDIO, MODE, MEMORY etc.)

Large multi-function text display (6 text fields / e.g. for displaying units, service information, etc.)

Three further big numeric displays (4 digits each, each max. 9999 / e.g. for simultaneous display of MIN, MAX, AVG values, 3 marker values, etc.)

Triple multi-function text displays (Next to each of the previously described numeric displays / 3x3 text fields each / used e.g. for unit display for markers, etc.)

Three more multi-function text displays (directly beneith the previously described displays / 3x6 text fields each / e.g. ADDITIONAL values AND unit display for markers, etc.)

Battery status and charging display (incl. "CHARGING" and "LOW")

6 numerical displays for flexible bargraph scaling (incl. multiplication factor and percentage display)

Thanks to the vast amount of flexible display options, this device can display various readings, a bargraph AND a spectral display (starting from NF-1010E resp. HF-2025E) SIMULTANEOUSLY, without bothersome switching back and forth.
Using SPECTRAN®, the user is supplied with virtually ALL information AT ONCE, without the hassle of switching back and forth. Where else can you find such luxury at a similar price ?

The COMPLETE digital multifunction display of SPECTRAN® at a glance
Lots of power: The rechargable Aaronia NiMH battery
Superlong operating time:
Starting with the SPECTRAN® NF-1010E, the rechargable Aaronia NiMH high-performance battery is supplied as standard. It has been developed specifically for the SPECTRAN® devices and is optimally suited for their requirements. Thanks to NiMH technology, the dreaded "Memory effect" is now a thing of the past, as with this power battery, maximum quality and long life have been our primary goals. Another reason why such a battery technology is necessary is the high power demand of the high-performance DSP used in all SPECTRAN® units, especially in the RF versions, which furthermore include very demanding RF receiving circuitry. Still, it is astounding that even when using the standard version of the Aaronia battery (1300mAh), continuous operation of the SPECTRAN® for approx. 4 hours is possible. The special version with 2200mAh (available at an extra charge) bumps this up to a stunning 7 hours! This is certainly a new all-time record for portable, battery-supplied spectrum analysers, or do you know a portable spectrum analyser which even remotely provides 7 hours of continuous operation with a single battery charge ?
Naturally, the necessary battery charger is also included. At the same time, it can be used for operating the SPECTRAN® units with mains power. The battery charger is integrated into all SPECTRAN® units, thus SPECTRAN® models NF-1010 and HF-2025 can also subsequently be extended with an Aaronia battery (STRONGLY recommended!).

The Aaronia POWER NiMH battery
INCLUDED WITH DELIVERY / Recommended ACCESSORIES
INCLUDED WITH DELIVERY:

NF spectrum analyser SPECTRAN NF-10xx
Sturdy cardboard packaging
9V battery
Manual with basic information, hints, background information and exposure limit tables
RECOMMENDED ACCESSORIES:

Rechargable Aaronia power battery with charger (STRONGLY recommended due to the high power demand. One piece is already included with the NF-1010E!)
Elegant aluminum carrycase to protect your valuable measurement device (already included with NF-1010E)
Detachable handle with super-practical miniature tripod mode: this handle is attachable to the backside of the unit and allows optimal handling (esp. for directional measurement) and even fixed installation of the unit

Package contents of SPECTRAN 10xx devices
Overview of features SPECTRAN® EMF (NF) spectrum analysers
APPLICATION EXAMPLES: Measurement of traction power, power lines, power cables, lamps, power supplies, transformer stations, various appliances in households, offices and manufacturing
NF-1010* NF-1010E* NF-3010* NF-3020* NF-5010* NF-5030*
SPECIFICATIONS base unit* For the NOVICE For the INTERMEDIATE For the PROFESSIONAL
Frequency range Min 10Hz 10Hz 10Hz 10Hz 1Hz 1Hz
Frequency range Max 10kHz 100kHz 400kHz 400kHz 1MHz 30MHz**
Range electrical field [V/m] (typical) Min (1D) 1V/m 1V/m 0,1V/m 0,1V/m 0,1V/m 0,1V/m
Range electrical field [V/m] (typical) Max (1D) 2kV/m 2kV/m 5kV/m 5kV/m 5kV/m 20kV/m
Range magnetic field [Tesla] (typical) Min (3D!) 10nT 10nT 1nT 1nT 1nT 1pT**
Range magnetic field [Tesla] (typical) Max (3D!) 100µT 100µT 100µT 100µT 100µT 2mT
Range magnetic field [Gauss] (typical) Min (3D!) 100µG 100µG 10µG 10µG 10µG 10nG**
Range magnetic field [Gauss] (typical) Max (3D!) 1G 1G 1G 1G 1G 20G
Filter bandwidth Min 5Hz 5Hz 1Hz 1Hz 1Hz 1Hz
Filter bandwidth Max 10kHz 100kHz 300kHz 300kHz 1MHz 1MHz
Accuracy base unit (typical) 5% 5% 5% 3% 3% 3%
FFT (Resolution in points) 64 64 64 64 1024 1024
Vector power measurement (I/Q) and True RMS - - ü ü ü ü
FEATURES
Standards conformant exp. limits (ICNIRP, BGV B11, BlmSchV etc.) - ü ü ü ü ü
Extended full ICNIRP range - - - - - ü
Isotropic (3D) AC magnetic field measurement ü ü ü ü ü ü
Supports custom P-Code software ü ü ü ü
ADVANCED HOLD mode (HOLD function) - ü ü ü ü ü
INTERNAL data logger (long-term measurements) - - ü ü ü ü
FLASH memory including firmware update (over the Internet) - 16K 64K 64K 64K(1MB) 64K(1MB)
“Clear text” signal identification with direct frequency display - ü ü ü ü ü
Integrated battery charging circuitry - ü ü ü ü ü
Internal speaker Piezo Piezo ü ü ü ü
Audio demodulation AM AM AM AM AM&FM AM&FM
DISPLAY
Fast FFT or DFT spectrum analyses - ü ü ü ü ü
Limit calculation with simultaneous percentage display ü ü ü ü ü ü
X, Y, Z Axis display or Vectorproduct (only M.-Field) - ü ü ü ü ü
Main display in V/m, Tesla, Gauss or A/m (switchable) - ü ü ü ü ü
High-resolution 50 segment bargraph (trend display) ü ü ü ü ü ü
3fold marker display (ex. 3x field strength & frequency at once) - ü ü ü ü ü
INTERFACES / CONNECTORS
Fast USB 2.0 interface (computer connection) - ü ü ü ü ü
Audio output ü ü ü ü ü ü
DC input (max. 15V) for external power supply ü ü ü ü ü ü
External ultra sensetive signal input (SMA input) with max. 0,2V - - - - ü ü
Jog Dial (Multi-functional dial) for "one-hand operation" - - ü ü ü ü
OPTIONS (extra charge)
Option 001 (1MB memory expansion) - - - - ü ü
Option 005 (12Bit DDC / offers ultra high sensetivity up to 1pT) - - - - - ü
Option 006 (Measure 3D static magnetic fields)* - - - - - ü
Option 008 (Expanded frequency range up to 30MHz e.g. RFID) - - - - - ü
Option 009 (Ultra high 24Bit resolution on static magnetic fields) - - - - - ü
INCLUDED ACCESSORIES in addition to the base unit
Aaronia 7,2V high-performance battery (1300mAh) + charger - ü ü ü ü ü
Aluminum design transport case incl. padding inlays opt. ü ü ü ü ü
PROFESSIONAL PC analysis software (Windows, download via Internet) - ü ü ü ü ü
List price plus shipping € 149,95 € 199,95 € 299,95 € 349,95 € 399,95 € 499,95
*Preliminary specifications as of 1.11.2007. ONLY the NF-50xx series with option 005 and latest BETA-Firmware is available. ALL other options are available for this series too. The BETA firmware is in continuous development. Some functionality may still be limited and not fully to specifications (BETA status). By regularly checking our homepage for updates, you can always keep your measurement device up-to-date. As soon as version 1.0 of the firmware is released, all functionality and features will be fully available.
Range and accuracy can change depending on frequency, sensor and used parameters. Precision values are based on Aaronia calibration-reference and only valid under specific test conditions. Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 22±3°C, relative air humidity 40% to 60%, continuous wave signal (CW), RMS detection
Option 006 offers a range of 100µG-6G (10nT-600µT). You can "zero" the static field sensor (Option 006) by using our "Zero Gauss" chamber.
**Standard: 1MHz. Only with option 008 up to 30MHz. / Standard: 1nT. Only with option 005 up to 1pT.
© Aaronia AG, DE-54597 Euscheid, Germany, www.aaronia.de, Tel. ++49(0)6556-93033
Aaronia AG, Gewerbegebiet Aaronia AG, DE-54597 Euscheid, Germany
Tel. ++49(0)6556-93033, Fax ++49(0)6556-93034
Email:mail@aaronia.de URL:www.aaronia.de

are registered trademarks of Aaronia AG
Back to Aaronia HOMEPAGE

The new standard: 3D MEASUREMENT
3D magnetic field measurement: Mismeasurement caused by wrongly adjusting the measurement device in space or troublesome and complex 3D calculations with a calculator are a problem of the past from now on, thanks to SPECTRAN® EMF (LF) measurement devices. All SPECTRAN® EMF measurement devices can measure magnetic fields directly in 3D! Starting with the SPECTRAN® NF-1010E, field strengths of the individual X, Y and Z axes can even be shown seperately. This has become possible thanks to the newest development from the Aaronia laboratories: Our high-tech REAL 3D miniature sensor coil. Consisting of a specially crafted nylon base with 3 independant windings made of ultra-thin, 0,05 mm! wire, it impresses with its extremely high sensitivity. It allows measurement of magnetic fields in all 3 spacial dimensions. The signal processor (DSP) of the SPECTRAN® performs the resulting highly complex calculations. You receive 3D measurement results which can otherwise only be achieved by using highly professional equipment.	Aaronia REAL-3D magnetic field sensor
NOTE: Units commonly found on the market which are particularly in use by novices for "EMF measurement" can, for the most part, ONLY measure magnetic fields in ONE dimension. Hence, by misaligning the measurement device in space, SERIOUS mismeasurement can occur: in extreme cases, no magnetic field might be shown at all even though an extremely high exposure is present. Tedious and complex 3D measurements are often not performed at all, or wrongly (especially by the novice). In contrast, SPECTRAN® can performs magnetic field measurements in 3D and thus offers PROFESSIONAL measurement right from the start!

Overview of features SPECTRAN® EMF (NF) spectrum analysers APPLICATION EXAMPLES: Measurement of traction power, power lines, power cables, lamps, power supplies, transformer stations, various appliances in households, offices and manufacturing
	NF-1010*	NF-1010E*	NF-3010*	NF-3020*	NF-5010*	NF-5030*
SPECIFICATIONS base unit*	For the NOVICE		For the INTERMEDIATE		For the PROFESSIONAL
Frequency range Min	10Hz	10Hz	10Hz	10Hz	1Hz	1Hz
Frequency range Max	10kHz	100kHz	400kHz	400kHz	1MHz	30MHz**
Range electrical field [V/m] (typical) Min (1D)	1V/m	1V/m	0,1V/m	0,1V/m	0,1V/m	0,1V/m
Range electrical field [V/m] (typical) Max (1D)	2kV/m	2kV/m	5kV/m	5kV/m	5kV/m	20kV/m
Range magnetic field [Tesla] (typical) Min (3D!)	10nT	10nT	1nT	1nT	1nT	1pT**
Range magnetic field [Tesla] (typical) Max (3D!)	100µT	100µT	100µT	100µT	100µT	2mT
Range magnetic field [Gauss] (typical) Min (3D!)	100µG	100µG	10µG	10µG	10µG	10nG**
Range magnetic field [Gauss] (typical) Max (3D!)	1G	1G	1G	1G	1G	20G
Filter bandwidth Min	5Hz	5Hz	1Hz	1Hz	1Hz	1Hz
Filter bandwidth Max	10kHz	100kHz	300kHz	300kHz	1MHz	1MHz
Accuracy base unit (typical)	5%	5%	5%	3%	3%	3%
FFT (Resolution in points)	64	64	64	64	1024	1024
Vector power measurement (I/Q) and True RMS	-	-	ü	ü	ü	ü
FEATURES
Standards conformant exp. limits (ICNIRP, BGV B11, BlmSchV etc.)	-	ü	ü	ü	ü	ü
Extended full ICNIRP range	-	-	-	-	-	ü
Isotropic (3D) AC magnetic field measurement	ü	ü	ü	ü	ü	ü
Supports custom P-Code software			ü	ü	ü	ü
ADVANCED HOLD mode (HOLD function)	-	ü	ü	ü	ü	ü
INTERNAL data logger (long-term measurements)	-	-	ü	ü	ü	ü
FLASH memory including firmware update (over the Internet)	-	16K	64K	64K	64K(1MB)	64K(1MB)
“Clear text” signal identification with direct frequency display	-	ü	ü	ü	ü	ü
Integrated battery charging circuitry	-	ü	ü	ü	ü	ü
Internal speaker	Piezo	Piezo	ü	ü	ü	ü
Audio demodulation	AM	AM	AM	AM	AM&FM	AM&FM
DISPLAY
Fast FFT or DFT spectrum analyses	-	ü	ü	ü	ü	ü
Limit calculation with simultaneous percentage display	ü	ü	ü	ü	ü	ü
X, Y, Z Axis display or Vectorproduct (only M.-Field)	-	ü	ü	ü	ü	ü
Main display in V/m, Tesla, Gauss or A/m (switchable)	-	ü	ü	ü	ü	ü
High-resolution 50 segment bargraph (trend display)	ü	ü	ü	ü	ü	ü
3fold marker display (ex. 3x field strength & frequency at once)	-	ü	ü	ü	ü	ü
INTERFACES / CONNECTORS
Fast USB 2.0 interface (computer connection)	-	ü	ü	ü	ü	ü
Audio output	ü	ü	ü	ü	ü	ü
DC input (max. 15V) for external power supply	ü	ü	ü	ü	ü	ü
External ultra sensetive signal input (SMA input) with max. 0,2V	-	-	-	-	ü	ü
Jog Dial (Multi-functional dial) for "one-hand operation"	-	-	ü	ü	ü	ü
OPTIONS (extra charge)
Option 001 (1MB memory expansion)	-	-	-	-	ü	ü
Option 005 (12Bit DDC / offers ultra high sensetivity up to 1pT)	-	-	-	-	-	ü
Option 006 (Measure 3D static magnetic fields)*	-	-	-	-	-	ü
Option 008 (Expanded frequency range up to 30MHz e.g. RFID)	-	-	-	-	-	ü
Option 009 (Ultra high 24Bit resolution on static magnetic fields)	-	-	-	-	-	ü
INCLUDED ACCESSORIES in addition to the base unit
Aaronia 7,2V high-performance battery (1300mAh) + charger	-	ü	ü	ü	ü	ü
Aluminum design transport case incl. padding inlays	opt.	ü	ü	ü	ü	ü
PROFESSIONAL PC analysis software (Windows, download via Internet)	-	ü	ü	ü	ü	ü
List price plus shipping	€ 149,95	€ 199,95	€ 299,95	€ 349,95	€ 399,95	€ 499,95
Preliminary specifications as of 1.11.2007. ONLY the NF-50xx series with option 005 and latest BETA-Firmware is available. ALL other options are available for this series too. The BETA firmware is in continuous development. Some functionality may still be limited and not fully to specifications (BETA status). By regularly checking our homepage for updates, you can always keep your measurement device up-to-date. As soon as version 1.0 of the firmware is released, all functionality and features will be fully available. Range and accuracy can change depending on frequency, sensor and used parameters. Precision values are based on Aaronia calibration-reference and only valid under specific test conditions. Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 22±3°C, relative air humidity 40% to 60%, continuous wave signal (CW), RMS detection Option 006 offers a range of 100µG-6G (10nT-600µT). You can "zero" the static field sensor (Option 006) by using our "Zero Gauss" chamber. *Standard: 1MHz. Only with option 008 up to 30MHz. / Standard: 1nT. Only with option 005 up to 1pT. © Aaronia AG, DE-54597 Euscheid, Germany, www.aaronia.de, Tel. ++49(0)6556-93033

SPECTRAN® 10xx spectrum analysers