Welcome to the Bartels Group of Companies
Index-Übersicht - Deutsche Version Index Reference - English Version
Bartels

Bartels System GmbH
Bartels
Bartels AutoEngineer
BAE Product Info
BAE Price List
BAE Downloads
BAE Documentation
BAE Installation Guide
BAE User Manual
BAE Libraries
User Language Programmer's Guide
Preface
1 Introduction
2 Language Description
3 Programming System
4 BAE User Language Programs
A Conventions and Definitions
B Index Variable Types
B.1 Index Reference
B.1.1 Standard Index Variable Types (STD)
B.1.2 Schematic Capture Index Variable Types (CAP)
B.1.3 Layout Index Variable Types (LAY)
B.1.4 CAM View Index Variable Types (CV)
B.1.5 IC Design Index Variable Types (ICD)
B.2 Standard Index Description (STD)
B.3 Schematic Capture Index Description (CAP)
B.4 Layout Index Description (LAY)
B.5 CAM View Index Description (CV)
B.6 IC Design Index Description (ICD)
C System Functions
BAE Update History
BAE Next Version Release Notes Preliminary
BAE V8.0 Release Notes
BAE V7.8 Release Notes
BAE V7.6 Release Notes
BAE V7.4 Release Notes
BAE V7.2 Release Notes
BAE V7.0 Release Notes
BAE V6.8 Release Notes
BAE V6.6 Release Notes
BAE V6.4 Release Notes
BAE V6.2 Release Notes
BAE V6.0 Release Notes
BAE V5.4 Release Notes
BAE V5.0 Release Notes
BAE V4.6 Release Notes
BAE V4.4 Release Notes
BAE V4.2 Release Notes
BAE V4.0 Release Notes
BAE V3.4 Release Notes
BAE Support
BAE Contributions
BAE Development and Service Companies
Electronics Development
Bartels Sport Service
Company Profile
Corporate Info
Bartels :: Bartels AutoEngineer :: BAE Documentation :: User Language Programmer's Guide :: Index Variable Types :: Index Reference
Bartels User Language - Programmer's Guide

B.1 Index Reference

Bartels AutoEngineer® Dokumentation

Each Bartels User Language index variable type is assigned to one of the caller types STD, CAP, LAY or ICD. This section lists the index variable types for each caller type.

 

B.1.1 Standard Index Variable Types (STD)

The following index variable types are assigned to caller type STD; i.e., they can be accessed from any of the Bartels AutoEngineer interpreter environments:

BAEPARAMBartels AutoEngineer Parameter
GLOBALVARGlobal User Language Variable
 

B.1.2 Schematic Capture Index Variable Types (CAP)

The following index variable types are assigned to caller type CAP; i.e., they can be accessed from the Schematic Editor interpreter environment:

C_ATTRIBUTESCM Part Attribute
C_BUSTAPSCM Bus Tap
C_CNETSCM Logical Net List
C_CONBASESCM Connection Segment Group
C_CONSEGSCM Connection Segment
C_FIGURESCM Figure Element
C_LEVELSCM Signal Level
C_MACROSCM Library Element
C_NREFSCM Named Macro Reference
C_POINTSCM Polygon Point
C_POLYSCM Polygon
C_POOLSCM Pool Element
C_TEXTSCM Text
CL_ALTPLNAMELayout Net List Alternate Part Package
CL_ATTRIBUTELayout Net List Attribute
CL_CNETLayout Net List
CL_CPARTLayout Net List Part Entry
CL_CPINLayout Net List Part Pin Entry
 

B.1.3 Layout Index Variable Types (LAY)

The following index variable types are assigned to caller type LAY; i.e., they can be accessed from the Layout Editor, the Autorouter and the CAM Processor interpreter environments:

L_ALTPLNAMELayout Net List Alternate Part Package Type
L_ATTRIBUTELayout Net List Attribute
L_CNETLayout Net List
L_CPARTLayout Net List Part Entry
L_CPINLayout Net List Part Pin Entry
L_DRCERRORLayout DRC Error Marker
L_DRCERROROKLayout DRC Error Acceptance
L_DRILLLayout Drill Hole
L_FIGURELayout Figure Element
L_LEVELLayout Signal Level
L_LINELayout Trace
L_MACROLayout Library Element
L_NREFLayout Named Macro Reference
L_POINTLayout Polygon Point
L_POLYLayout Polygon
L_POOLLayout Pool Element
L_POWLAYERLayout Power Layer
L_TEXTLayout Text
L_UREFLayout Unnamed Macro Reference
 

B.1.4 CAM View Index Variable Types (CV)

The following index variable types are assigned to caller type CV; i.e., they can be accessed from the CAM View interpreter environment:

CV_DATASETCAM View Data Set
 

B.1.5 IC Design Index Variable Types (ICD)

The following index variable types are assigned to caller type ICD; i.e., they can be accessed from the Chip Editor interpreter environment:

I_ATTRIBUTEIC Design Net List Attribute
I_CNETIC Design Net List
I_CPARTIC Design Net List Part Entry
I_CPINIC Design Net List Part Pin Entry
I_FIGUREIC Design Figure Element
I_LEVELIC Design Signal Level
I_LINEIC Design Trace
I_MACROIC Design Library Element
I_NREFIC Design Named Macro Reference
I_POINTIC Design Polygon Point
I_POLYIC Design Polygon
I_POOLIC Design Pool Element
I_TEXTIC Design Text
I_UREFIC Design Unnamed Macro Reference
Bartels :: Bartels AutoEngineer :: BAE Documentation :: User Language Programmer's Guide :: Index Variable Types :: Index Reference

Index Reference
© 1985-2024 Oliver Bartels F+E • Updated: 22 October 2010, 20:05 [UTC]

© 1985-2024 Oliver Bartels F+E Bartels Homepage Contact and Corporate Info

Web Development by Baumeister Mediasoft Engineering

Index-Übersicht - Deutsche Version Index Reference - English Version